Fastime 500DM2 Fastime Stopwatch

The Fastime 500DM2 is a Decimal minute 500 lap segmented memory triple display stopwatch.

They key feature of this stopwatch is the enabling of the lap and cumulative split times for each event to be stored in the stopwatches memory as one segment.

The Fastime 500DM2 stopwatch is aimed at the work study sector enabling timing in the following formats:

- Normal 1/100th sec stopwatch
- 1/1000th minute
- 1/10,000th hour
- Seconds only: Continuous seconds to 1/100th second 

Functions of the Fastime 500DM2 Stopwatch

Stopwatch
Measures up to 9hrs 59mins 59secs 99/100ths sec. Triple display shows lap counter, cumulative and lap split times to the last split, cumulative and running times and running chronograph time.

500 cumulative and split times can be stored in memory as egments with fastest, slowest times identified. Time out (start, stop, resume) function is also included.

Data Recall
Memory recall during operation and reset. The number of free (unused) memories is shown first. For each segment, the segment header display will show:
- The date and time stamp when the segment was started
- The segment number 
- The number of laps stored in the segment

When the required segment is selected, press the recall button consecutively to read through all the lap and split times within each segment.

Repeating Countdown/up Timer
Maximum setting 19hr 59min 59sec, display shows TARGET TIME, and COUNTING DOWN TIME. Alarm sounds at the end of each countdown/up.

Pacer Function
The pacer value can be adjusted from 05 to 320 PACES per minute. Use this function to set and measure a required number of actions per minute.

Speed Mode
Enter a distance over which time is to be measured, for example a racing circuit of 1 mile (or km). The stopwatch will then show the lap time and speed for each lap. Speed is measured in units per hour. Therefore speed = distance x 60.

Stroke Rate
Measures a sample of 3 strokes or actions and returns a frequency or rate per minute. Ideal for swimming or rowing.

Time of Day Display
Hour, minute, seconds time of day with 12/24 hour option. Year month day date.

Other features:

• Environment temperature
• On/Off display
• Button mute
• Display contrast adjustment
• LED backlight
• Restore factory settings

How to enable continuous seconds:

When you are in a decimal function mode, reset to zero. Then hold down the MODE button for three seconds to clear the memory. Hold down the MODE button again for another three seconds to switch into the next decimal mode. The change is indicated by a small letter on the right below the line. Hold the button down until that letter changes - M for decimal minute, H for decimal hour and S for continuous seconds.